Finding a cheaper energy tariff is less about choosing the lowest advertised unit rate and more about comparing the full annual cost for your household. This guide explains how to compare gas and electricity tariffs, estimate your likely spend, check contract terms and decide when switching could be worthwhile.
Overview
Energy deals usually combine two charges: a unit rate for each kilowatt-hour (kWh) of gas or electricity you use, and a daily standing charge. Your bill may also depend on payment method, meter type, contract length, exit fees and whether the tariff requires a smart meter.
The cheapest tariff for one household may not be the cheapest for another. A home with high electricity use, for example, may benefit more from a lower electricity unit rate, while a low-use property may be more affected by the standing charge. Comparing the estimated annual cost using your own consumption is therefore more useful than comparing headline rates alone.
Before starting, collect your latest bill or statement. Look for:
- Annual gas consumption in kWh.
- Annual electricity consumption in kWh.
- Your current gas and electricity unit rates.
- Your gas and electricity standing charges.
- The tariff name, end date and any exit fee.
- Your payment method and meter arrangement.
Ofgem's price-cap context can affect variable tariff pricing, but the relevant rates and terms change over time. Treat any figure shown in a comparison result as time-sensitive and check the supplier's current offer before agreeing to switch.
How to estimate your energy cost
Use the following calculation for each fuel:
Estimated annual cost = (annual usage in kWh × unit rate) + (daily standing charge × 365)
Calculate gas and electricity separately, then add them together. If a supplier quotes rates in pence, convert them to pounds before multiplying. For example, a unit rate of 25 pence per kWh should be entered as £0.25 per kWh.
To compare a proposed tariff with your current one, calculate both annual totals using the same consumption figures. The difference between the two totals gives an estimated saving or additional cost before considering any exit fee, cashback, account credit or other condition.
A simple comparison table can help you review offers consistently:
| Feature | Current tariff | Tariff being considered |
|---|---|---|
| Gas unit rate | Check your bill | Check the offer |
| Electricity unit rate | Check your bill | Check the offer |
| Gas standing charge | Daily amount | Daily amount |
| Electricity standing charge | Daily amount | Daily amount |
| Estimated annual cost | Calculate | Calculate |
| Exit fee | Check terms | Check terms |
| Contract type and end date | Variable or fixed | Variable or fixed |
Do not compare a monthly direct debit with a supplier's estimated monthly payment as though either were the final price. Direct debits are often set to spread payments across the year, while actual costs depend on usage and the tariff rates. The annual unit-rate-and-standing-charge calculation is a better starting point.
Inputs and assumptions
Usage figures
Use annual kWh figures from a statement rather than guessing from your monthly payment. If you have moved home, changed your heating habits or installed new appliances, your previous usage may not represent future consumption. In that case, use a recent period as a guide and label the result as an estimate.
Fixed versus variable tariffs
A fixed tariff normally sets the unit rates and standing charges for a stated contract period, subject to the supplier's terms. A variable tariff can change, so its quoted annual cost should be treated as an estimate based on the rates available at the time of comparison. Review what happens when a fixed deal ends rather than allowing the renewal position to go unnoticed.
Standing charges
Standing charges apply regardless of how much energy you use. They make a noticeable difference for low-use households, empty properties and homes that use little gas during part of the year. Compare the gas and electricity standing charges separately; a tariff with an attractive unit rate may have higher fixed daily costs.
Exit fees and contract terms
Check whether leaving your current tariff early triggers an exit fee and whether the potential saving is large enough to justify it. Also check the proposed tariff's contract length, exit-fee conditions, payment requirements, smart-meter requirements, billing method and any eligibility restrictions.
Payment method and support needs
Some offers may be priced differently according to how you pay or manage the account. Only compare a payment method you can use reliably. If you need accessible communications, paper bills, additional account support or a particular meter arrangement, include those requirements before treating an offer as suitable.
Worked examples
The following figures are illustrative only and are not a current market quote. Suppose a household uses 10,000 kWh of gas and 2,700 kWh of electricity in a year. It is comparing a current tariff with a proposed fixed tariff.
For the proposed tariff, assume an illustrative gas rate of £0.07 per kWh, an electricity rate of £0.25 per kWh, a combined daily standing charge of £0.85 and no exit fee. The estimate would be:
- Gas usage: 10,000 × £0.07 = £700.
- Electricity usage: 2,700 × £0.25 = £675.
- Standing charges: £0.85 × 365 = £310.25.
- Estimated annual total: £1,685.25.
If the current tariff calculation produces £1,760 using the same usage, the apparent difference is £74.75 per year. That is not automatically a guaranteed saving: the household should still check whether rates can change, whether an exit fee applies to the current deal, whether the estimate includes all relevant charges and whether the proposed contract suits its payment and meter requirements.
Test the result with a higher and lower usage scenario. For instance, recalculate after increasing and reducing the annual kWh figures by a reasonable margin based on your household's past consumption. This shows whether the comparison remains favourable if your usage changes.
When to recalculate
Revisit your comparison whenever the inputs change. Useful review points include:
- When your fixed tariff approaches its end date.
- After a price-cap or supplier pricing update affects your variable tariff.
- When your household size, heating pattern or working arrangements change.
- After installing solar panels, a heat pump, an electric vehicle or major appliances.
- When a supplier changes its standing charges, unit rates or payment conditions.
- When you receive an annual statement with updated consumption information.
To repeat the process, download or photograph your latest bill, record annual kWh usage, enter the current unit rates and standing charges, and calculate the full annual cost for each option. Then check the tariff type, end date, exit fees, meter requirements and payment conditions. Compare like with like, keep a note of the date checked and confirm the final terms directly with the supplier or comparison service before switching.
Energy prices and contract features can change, so a result that is useful today may not remain suitable later. Set a reminder for your tariff end date and review the calculation again after significant pricing changes. This small routine can help you avoid relying on an outdated estimate and keep your household energy choice aligned with current costs and needs.